Tuesday, August 6, 2019
Father Brown vs Brother Cadfael Essay Example for Free
Father Brown vs Brother Cadfael Essay Father Brown and Brother Cadfael were both men of the church who were put into situations where they needed to solve some sort of crime. Unmistakably the two had similarities in how they solve the crime. Who would have been better to solve a crime than a man of God? They had their differences in how they did their job as well. Most of all, they had the biggest difference, which is the dissimilarity in what they believed. They didnââ¬â¢t solve the same crime, but how they did it was similar in certain ways. Brother Cadfael and Father Brown were both crime-solving men, who had some similarities. They were both behind the scenes doing work, as they tried to find clues in there own way. Ultimately Brown was more observant with his listening, while Cadfael was more observant with his sight and his touch. They were very similar in some ways and both wanted to get the job done. The notably natural detectives both share the want to solve the crime. Although they have many similarities, they also have many differences. Cadfael and Brown undoubtedly had the want to solve the crime, but how they solve it is the difference. Naturally, the two ââ¬Å"detectivesâ⬠have a lot of differences ranging from a variety of things. Cadfael had to touch the body and had to get into the nitty gritty work, while Brown listened and observed from a distance. Brown could find out who did it and what happened fairly quickly while it took Cadfael much longer to understand what happened and who did it. Cadfael had a rough life in the army and joined ministry because he wanted a quiet life. He did not join in because he wanted to serve the Lord. Brown loves the lord and people and that was a big difference between the two. Brown was very observant and knows different characteristics, such as on page 84 in the story ââ¬Å"the salad of Cornel Crayâ⬠Brown says ââ¬Å"real madmen always encourages their own morbidity. They never strive against it. But you are trying to find traces of the burglar; even when there arenââ¬â¢t any. You are struggling against it. You want what no man wants. â⬠This insists that Brown knew far more about peopleââ¬â¢s habits than Cadfael did. The two of them had a lot of differences and they were as close to opposite as you could get. They had differences of solving the case but also in how they view what was going on. There way of the solving the case was different and so was their world view. Brown wanted to solve the crime and to make the world a better place, while Cadfael just wanted to get it over with so that he can go back to his peaceful life. Specifically, Cadfael was a man from the army before his life in the church. All Cadfael wanted was a life of peace, especially from his service to his country. Cadfael had felt no remorse from the men he had killed. Cadfael wasnââ¬â¢t doing some of the work for God he was doing the work for himself. Brown was doing what he did for God and so that the world would be a better place, and not for his own good. The cautious but completely clever Father Brown had a sense of heart, when a war hero was the bad guy he didnââ¬â¢t do anything because he didnââ¬â¢t want to bring disgrace to a national hero. Cadfael would possibly want the glory to be brought to him, and Brown would want everything be solved, they are very different on their view of how things work. Father Brown and Brother Cadfael were crime solving, God following men. Under one God they serviced. They were alike in some ways. Also they were different in many ways. When it came to their worldview, the two of them were very far apart. When it came to crime solving they had a few similarities. They also had lots of differences and each had their own advantage in that case. When it comes down to the point they get the job done. Altogether they both had their strengths and weaknesses. The aggressive detectives always did get the job done.
Monday, August 5, 2019
Three Major Issues Faced By Companies Going Overseas Marketing Essay
Three Major Issues Faced By Companies Going Overseas Marketing Essay The chapter begins by looking at the concept of market entry strategies within the control of a chosen marketing mix. It then goes on to describe the different forms of entry strategy, both direct and indirect exporting and foreign production, and the advantages and disadvantages connected with each method. The chapter gives specific details on countertrade, which is very prevalent in global marketing, and then concludes by looking at the special features of commodity trading with its close coupling between production and marketing. Basic issues An organisation wishing to go international faces three major issues: i) Marketing which countries, which segments, how to manage and implement marketing effort, how to enter with intermediaries or directly, with what information? ii) Sourcing whether to obtain products, make or buy? iii) Investment and control joint venture, global partner, acquisition? Decisions in the marketing area focus on the value chain (see figure 7.1). The strategy or entry alternatives must ensure that the necessary value chain activities are performed and integrated. Table 7.1 Examples of elements included in the export marketing mix 1. Product support Product sourcing Match existing products to markets air, sea, rail, road, freight New products Product management Product testing Manufacturing specifications Labelling Packaging Production control Market information 2. Price support Establishment of prices Discounts Distribution and maintenance of pricelists Competitive information Training of agents/customers 3. Promotion/selling support Advertising Promotion literature Direct mail Exhibitions, trade shows Printing Selling (direct) Sales force Agents commissions Sale or returns 4. Inventory support Inventory management Warehousing Distribution Parts supply Credit authorisation 5. Distribution support Funds provision Raising of capital Order processing Export preparation and documentation Freight forwarding Insurance Arbitration 6. Service support Market information/intelligence Quotes processing Technical aid assistance After sales Guarantees Warranties/claims Merchandising Sales reports, catalogues literature Customer care Budgets Data processing systems Insurance Tax services Legal services Translation 7. Financial support Billing, collecting invoices Hire, rentals Planning, scheduling budget data Auditing Details on the sourcing element have already been covered in the chapter on competitive analysis and strategy. Concerning investment and control, the question really is how far the company wishes to control its own fate. The degree of risk involved, attitudes and the ability to achieve objectives in the target markets are important facets in the decision on whether to license, joint venture or get involved in direct investment. Cunningham1 (1986) identified five strategies used by firms for entry into new foreign markets: i) Technical innovation strategy perceived and demonstrable superior products ii) Product adaptation strategy modifications to existing products iii) Availability and security strategy overcome transport risks by countering perceived risks iv) Low price strategy penetration price and, v) Total adaptation and conformity strategy foreign producer gives a straight copy. In marketing products from less developed countries to developed countries point iii) poses major problems. Buyers in the interested foreign country are usually very careful as they perceive transport, currency, quality and quantity problems. This is true, say, in the export of cotton and other commodities. Because, in most agricultural commodities, production and marketing are interlinked, the infrastructure, information and other resources required for building market entry can be enormous. Sometimes this is way beyond the scope of private organisations, so Government may get involved. It may get involved not just to support a specific commodity, but also to help the public good. Whilst the building of a new road may assist the speedy and expeditious transport of vegetables, for example, and thus aid in their marketing, the road can be put to other uses, in the drive for public good utilities. Moreover, entry strategies are often marked by lumpy investments. Huge investments may have to be undertaken, with the investor paying a high risk price, long before the full utilisation of the investment comes. Good examples of this include the building of port facilities or food processing or freezing facilities. Moreover, the equipment may not be able to be used for other processes, so the as set specific equipment, locked into a specific use, may make the owner very vulnerable to the bargaining power of raw material suppliers and product buyers who process alternative production or trading options. Zimfreeze, Zimbabwe is experiencing such problems. It built a large freezing plant for vegetables but found itself without a contract. It has been forced, at the moment, to accept sub optional volume product materials just in order to keep the plant ticking over. In building a market entry strategy, time is a crucial factor. The building of an intelligence system and creating an image through promotion takes time, effort and money. Brand names do not appear overnight. Large investments in promotion campaigns are needed. Transaction costs also are a critical factor in building up a market entry strategy and can become a high barrier to international trade. Costs include search and bargaining costs. Physical distance, language barriers, logistics costs and risk limit the direct monitoring of trade partners. Enforcement of contracts may be costly and weak legal integration between countries makes things difficult. Also, these factors are important when considering a market entry strategy. In fact these factors may be so costly and risky that Governments, rather than private individuals, often get involved in commodity systems. This can be seen in the case of the Citrus Marketing Board of Israel. With a monopoly export marketing board, the entire system can behave like a single firm, regulating the mix and quality of products going to different markets and negotiating with transporters and buyers. Whilst these Boards can experience economies of scale and absorb many of the risks listed above, they can shield producers from information about, and from. buyers. They can also become the fiefdoms of vested interests and become political in nature. They then result in giving reduced production incentives and cease to be demand or market orientated, which is detrimental to producers. Normal ways of expanding the markets are by expansion of product line, geographical development or both. It is important to note that the more the product line and/or the geographic area is expanded the greater will be the managerial complexity. New market opportunities may be made available by expansion but the risks may outweigh the advantages, in fact it may be better to concentrate on a few geographic areas and do things well. This is typical of the horticultural industry of Kenya and Zimbabwe. Traditionally these have concentrated on European markets where the markets are well known. Ways to concentrate include concentrating on geographic areas, reducing operational variety (more standard products) or making the organisational form more appropriate. In the latter the attempt is made to globalise the offering and the organisation to match it. This is true of organisations like Coca Cola and MacDonalds. Global strategies include country centred strategies (highly decentralised and limited international coordination), local market approaches (the marketing mix developed with the specific local (foreign) market in mind) or the lead market approach (develop a market which will be a best predictor of other markets). Global approaches give economies of scale and the sharing of costs and risks between markets. Entry strategies There are a variety of ways in which organisations can enter foreign markets. The three main ways are by direct or indirect export or production in a foreign country (see figure 7.2). Exporting Exporting is the most traditional and well established form of operating in foreign markets. Exporting can be defined as the marketing of goods produced in one country into another. Whilst no direct manufacturing is required in an overseas country, significant investments in marketing are required. The tendency may be not to obtain as much detailed marketing information as compared to manufacturing in marketing country; however, this does not negate the need for a detailed marketing strategy. The advantages of exporting are: à · manufacturing is home based thus, it is less risky than overseas based à · gives an opportunity to learn overseas markets before investing in bricks and mortar à · reduces the potential risks of operating overseas. The disadvantage is mainly that one can be at the mercy of overseas agents and so the lack of control has to be weighed against the advantages. For example, in the exporting of African horticultural products, the agents and Dutch flower auctions are in a position to dictate to producers. A distinction has to be drawn between passive and aggressive exporting. A passive exporter awaits orders or comes across them by chance; an aggressive exporter develops marketing strategies which provide a broad and clear picture of what the firm intends to do in the foreign market. Pavord and Bogart2 (1975) found significant differences with regard to the severity of exporting problems in motivating pressures between seekers and non-seekers of export opportunities. They distinguished between firms whose marketing efforts were characterized by no activity, minor activity and aggressive activity. Those firms who are aggressive have clearly defined plans and strategy, including product, price, promotion, distribution and research elements. Passiveness versus aggressiveness depends on the motivation to export. In countries like Tanzania and Zambia, which have embarked on structural adjustment programmes, organisations are being encouraged to export, motivated by foreign exchange earnings potential, saturated domestic markets, growth and expansion objectives, and the need to repay debts incurred by the borrowings to finance the programmes. The type of export response is dependent on how the pressures are perceived by the decision maker. Piercy (1982)3 highlights the fact that the degree of involvement in foreign operations depends on endogenous versus exogenous motivating factors, that is, whether the motivations were as a result of active or aggressive behaviour based on the firms internal situation (endogenous) or as a result of reactive environmental changes (exogenous). If the firm achieves initial success at exporting quickly all to the good, but the risks of failure in the early stages are high. The learning effect in exporting is usually very quick. The key is to learn how to minimise risks associated with the initial stages of market entry and commitment this process of incremental involvement is called creeping commitment (see figure 7.3). Exporting methods include direct or indirect export. In direct exporting the organisation may use an agent, distributor, or overseas subsidiary, or act via a Government agency. In effect, the Grain Marketing Board in Zimbabwe, being commercialised but still having Government control, is a Government agency. The Government, via the Board, are the only permitted maize exporters. Bodies like the Horticultural Crops Development Authority (HCDA) in Kenya may be merely a promotional body, dealing with advertising, information flows and so on, or it may be active in exporting itself, particularly giving approval (like HCDA does) to all export documents. In direct exporting the major problem is that of market information. The exporters task is to choose a market, find a representative or agent, set up the physical distribution and documentation, promote and price the product. Control, or the lack of it, is a major problem which often results in decisions on pricing, certification and promoti on being in the hands of others. Certainly, the phytosanitary requirements in Europe for horticultural produce sourced in Africa are getting very demanding. Similarly, exporters are price takers as produce is sourced also from the Caribbean and Eastern countries. In the months June to September, Europe is on season because it can grow its own produce, so prices are low. As such, producers are better supplying to local food processors. In the European winter prices are much better, but product competition remains. According to Collett4 (1991)) exporting requires a partnership between exporter, importer, government and transport. Without these four coordinating activities the risk of failure is increased. Contracts between buyer and seller are a must. Forwarders and agents can play a vital role in the logistics procedures such as booking air space and arranging documentation. A typical coordinated marketing channel for the export of Kenyan horticultural produce is given in figure 7.4. In this case the exporters can also be growers and in the low season both these and other exporters may send produce to food processors which is also exported. Figure 7.4 The export marketing channel for Kenyan horticultural products. Exporting can be very lucrative, especially if it is of high value added produce. For example in 1992/93 Zimbabwe exported 5 338,38 tonnes of flowers, 4 678,18 tonnes of horticultural produce and 12 000 tonnes of citrus at a total value of about US$ 22 016,56 million. In some cases a mixture of direct and indirect exporting may be achieved with mixed results. For example, the Grain Marketing Board of Zimbabwe may export grain directly to Zambia, or may sell it to a relief agency like the United Nations, for feeding the Mozambican refugees in Malawi. Payment arrangements may be different for the two transactions. Nali products of Malawi gives an interesting example of a passive to active exporting mode. CASE 7.1 Nali Producers Malawi Nali group, has, since the early 1970s, been engaged in the growing and exporting of spices. Spices are also used in the production of a variety of sauces for both the local and export market. Its major success has been the growing and exporting of Birdseye chilies. In the early days knowledge of the market was scanty and thus the company was obtaining ridiculously low prices. Towards the end of 1978 Nali chilies were in great demand, yet still the company, in its passive mode, did not fully appreciate the competitive implications of the business until a number of firms, including Lonrho and Press Farming, started to grow and export. Again, due to the lack of information, a product of its passivity, the firm did not realise that Uganda, with their superior product, and Papua New Guinea were major exporters, However, the full potential of these countries was hampered by internal difficulties. Nali was able to grow into a successful commercial enterprise. However, with the end of the internal problems, Uganda in particular, began an aggressive exporting policy, using their overseas legations as commercial propagandists. Nali had to respond with a more formal and active marketing operation. However it is being now hampered by a number of important exogenous factors. The entry of a number of new Malawian growers, with inferior products, has damaged the Malawian chili reputation, so has the lack of a clear Government policy and the lack of financing for traders, growers and exporters. The latter only serves to emphasise the point made by Collett, not only do organisations need to be aggressive, they also need to enlist the support of Government and importers. It is interesting to note that Korey (1986) warns that direct modes of market entry may be less and less available in the future. Growing trading blocs like the EU or EFTA means that the establishing of subsidiaries may be one of the only means forward in future. It is interesting to note that Korey5 1986 warned that direct modes of market entry may be less and less available in the future. Growing trading blocks like the EU or EFTA means that the establishment of subsidiaries may be one of the only ways forward in future. Indirect methods of exporting include the use of trading companies (very much used for commodities like cotton, soya, cocoa), export management companies, piggybacking and countertrade. Indirect methods offer a number of advantages including: à · Contracts in the operating market or worldwide à · Commission sates give high motivation (not necessarily loyalty) à · Manufacturer/exporter needs little expertise à · Credit acceptance takes burden from manufacturer. Piggybacking Piggybacking is an interesting development. The method means that organisations with little exporting skill may use the services of one that has. Another form is the consolidation of orders by a number of companies in order to take advantage of bulk buying. Normally these would be geographically adjacent or able to be served, say, on an air route. The fertilizer manufacturers of Zimbabwe, for example, could piggyback with the South Africans who both import potassium from outside their respective countries. Countertrade By far the largest indirect method of exporting is countertrade. Competitive intensity means more and more investment in marketing. In this situation the organisation may expand operations by operating in markets where competition is less intense but currency based exchange is not possible. Also, countries may wish to trade in spite of the degree of competition, but currency again is a problem. Countertrade can also be used to stimulate home industries or where raw materials are in short supply. It can, also, give a basis for reciprocal trade. Estimates vary, but countertrade accounts for about 20-30% of world trade, involving some 90 nations and between US $100-150 billion in value. The UN defines countertrade as commercial transactions in which provisions are made, in one of a series of related contracts, for payment by deliveries of goods and/or services in addition to, or in place of, financial settlement. Countertrade is the modem form of barter, except contracts are not legal and it is not covered by GATT. It can be used to circumvent import quotas. Countertrade can take many forms. Basically two separate contracts are involved, one for the delivery of and payment for the goods supplied and the other for the purchase of and payment for the goods imported. The performance of one contract is not contingent on the other although the seller is in effect accepting products and services from the importing country in partial or total settlement for his exports. There is a broad agreement that countertrade can take various forms of exchange like barter, counter purchase, switch trading and compensation (buyback). For example, in 1986 Albania began offering items like spring water, tomato juice and chrome ore in exchange for a contract to build a US $60 million fertilizer and methanol complex. Information on potential exchange can be obtained from embassies, trade missions or the EU trading desks. Barter is the direct exchange of one good for another, although valuation of respective commodities is difficult, so a currency is used to underpin the items value. Barter trade can take a number of formats. Simple barter is the least complex and oldest form of bilateral, non-monetarised trade. Often it is called straight, classical or pure barter. Barter is a direct exchange of goods and services between two parties. Shadow prices are approximated for products flowing in either direction. Generally no middlemen are involved. Usually contracts for no more than one year are concluded, however, if for longer life spans, provisions are included to handle exchange ratio fluctuations when world prices change. Closed end barter deals are modifications of straight barter in that a buyer is found for goods taken in barter before the contract is signed by the two trading parties. No money is involved and risks related to product quality are significantly reduced. Clearing account barter, also termed clearing agreements, clearing arrangements, bilateral clearing accounts or simply bilateral clearing, is where the principle is for the trades to balance without either party having to acquire hard currency. In this form of barter, each party agrees in a single contract to purchase a specified and usually equal value of goods and services. The duration of these transactions is commonly one year, although occasionally they may extend over a longer time period. The contracts value is expressed in non-convertible, clearing account units (also termed clearing dollars) that effectively represent a line of credit in the central bank of the country with no money involved. Clearing account units are universally accepted for the accounting of trade between countries and parties whose commercial relationships are based on bilateral agreements. The contract sets forth the goods to be exchanged, the rates of exchange, and the length of time for completing the transaction. Limited export or import surpluses may be accumulated by either party for short periods. Generally, after one years time, imbalances are settled by one of the following approaches: credit against the following year, acceptance of unwanted goods, payment of a previously specified penalty or payment of the difference in hard currency. Trading specialists have also initiated the practice of buying clearing dollars at a discount for the purpose of using them to purchase saleable products. In turn, the trader may forfeit a portion of the discount to sell these products for hard currency on the international market. Compared with simple barter, clearing accounts offer greater flexibility in the length of time for drawdown on the lines of credit and the types of products exchanged. Counter purchase, or buyback, is where the customer agrees to buy goods on condition that the seller buys some of the customers own products in return (compensatory products). Alternatively, if exchange is being organised at national government level then the seller agrees to purchase compensatory goods from an unrelated organisation up to a pre-specified value (offset deal). The difference between the two is that contractual obligations related to counter purchase can extend over a longer period of time and the contract requires each party to the deal to settle most or all of their account with currency or trade credits to an agreed currency value. Where the seller has no need for the item bought he may sell the produce on, usually at a discounted price, to a third party. This is called a switch deal. In the past a number of tractors have been brought into Zimbabwe from East European countries by switch deals. Compensation (buy-backs) is where the supplier agrees to take the output of the facility over a specified period of time or to a specified volume as payment. For example, an overseas company may agree to build a plant in Zambia, and output over an agreed period of time or agreed volume of produce is exported to the builder until the period has elapsed. The plant then becomes the property of Zambia. Khoury6 (1984) categorises countertrade as follows (see figure 7.5): One problem is the marketability of products received in countertrade. This problem can be reduced by the use of specialised trading companies which, for a fee ranging between 1 and 5% of the value of the transaction, will provide trade related services like transportation, marketing, financing, credit extension, etc. These are ever growing in size. Countertrade has disadvantages: à · Not covered by GATT so dumping may occur à · Quality is not of international standard so costly to the customer and trader à · Variety is tow so marketing of wkat is limited à · Difficult to set prices and service quality à · Inconsistency of delivery and specification, à · Difficult to revert to currency trading so quality may decline further and therefore product is harder to market. Figure 7.5 Classification of countertrade Shipley and Neale7 (1988) therefore suggest the following: à · Ensure the benefits outweigh the disadvantages à · Try to minimise the ratio of compensation goods to cash if possible inspect the goods for specifications à · Include all transactions and other costs involved in countertrade in the nominal value specified for the goods being sold à · Avoid the possibility of error of exploitation by first gaining a thorough understanding of the customers buying systems, regulations and politics, à · Ensure that any compensation goods received as payment are not subject to import controls. Despite these problems countertrade is likely to grow as a major indirect entry method, especially in developing countries. Foreign production Besides exporting, other market entry strategies include licensing, joint ventures, contract manufacture, ownership and participation in export processing zones or free trade zones. Licensing: Licensing is defined as the method of foreign operation whereby a firm in one country agrees to permit a company in another country to use the manufacturing, processing, trademark, know-how or some other skill provided by the licensor. It is quite similar to the franchise operation. Coca Cola is an excellent example of licensing. In Zimbabwe, United Bottlers have the licence to make Coke. Licensing involves little expense and involvement. The only cost is signing the agreement and policing its implementation. Licensing gives the following advantages: à · Good way to start in foreign operations and open the door to low risk manufacturing relationships à · Linkage of parent and receiving partner interests means both get most out of marketing effort à · Capital not tied up in foreign operation and à · Options to buy into partner exist or provision to take royalties in stock. The disadvantages are: à · Limited form of participation to length of agreement, specific product, process or trademark à · Potential returns from marketing and manufacturing may be lost à · Partner develops know-how and so licence is short à · Licensees become competitors overcome by having cross technology transfer deals and à · Requires considerable fact finding, planning, investigation and interpretation. Those who decide to license ought to keep the options open for extending market participation. This can be done through joint ventures with the licensee. Joint ventures Joint ventures can be defined as an enterprise in which two or more investors share ownership and control over property rights and operation. Joint ventures are a more extensive form of participation than either exporting or licensing. In Zimbabwe, Olivine industries has a joint venture agreement with HJ Heinz in food processing. Joint ventures give the following advantages: à · Sharing of risk and ability to combine the local in-depth knowledge with a foreign partner with know-how in technology or process à · Joint financial strength à · May be only means of entry and à · May be the source of supply for a third country. They also have disadvantages: à · Partners do not have full control of management à · May be impossible to recover capital if need be à · Disagreement on third party markets to serve and à · Partners may have different views on expected benefits. If the partners carefully map out in advance what they expect to achieve and how, then many problems can be overcome. Ownership: The most extensive form of participation is 100% ownership and this involves the greatest commitment in capital and managerial effort. The ability to communicate and control 100% may outweigh any of the disadvantages of joint ventures and licensing. However, as mentioned earlier, repatriation of earnings and capital has to be carefully monitored. The more unstable the environment the less likely is the ownership pathway an option. These forms of participation: exporting, licensing, joint ventures or ownership, are on a continuum rather than discrete and can take many formats. Anderson and Coughlan8 (1987) summarise the entry mode as a choice between company owned or controlled methods integrated channels or independent channels. Integrated channels offer the advantages of planning and control of resources, flow of information, and faster market penetration, and are a visible sign of commitment. The disadvantages are that they incur many costs (especially marketing), the risks are high, some may be more effective than others (due to culture) and in some cases their credibility amongst locals may be lower than that of controlled independents. Independent channels offer lower performance costs, risks, less capital, high local knowledge and credibility. Disadvantages include less market information flow, greater coordinating and control difficulties and motivational difficulties. In addition they may not be will ing to spend money on market development and selection of good intermediaries may be difficult as good ones are usually taken up anyway. Once in a market, companies have to decide on a strategy for expansion. One may be to concentrate on a few segments in a few countries typical are cashewnuts from Tanzania and horticultural exports from Zimbabwe and Kenya or concentrate on one country and diversify into segments. Other activities include country and market segment concentration typical of Coca Cola or Gerber baby foods, and finally country and segment diversification. Another way of looking at it is by identifying three basic business strategies: stage one international, stage two multinational (strategies correspond to ethnocentric and polycentric orientations respectively) and stage three global strategy (corresponds with geocentric orientation). The basic philosophy behind stage one is extension of programmes and products, behind stage two is decentralisation as far as possible to local operators and behind stage three is an integration which seeks to synthesize inputs from world and regional headquarters an d the country organisation. Whilst most developing countries are hardly in stage one, they have within them organisations which are in stage three. This has often led to a rebellion against the operations of multinationals, often unfounded. Export processing zones (EPZ) Whilst not
Autocratic Democratic And Laissez Faire Management Essay
Autocratic Democratic And Laissez Faire Management Essay In the past twelve months I have witnessed quite a few leadership styles. When i was working in one of the diamond manufacturing companys the leader of the firm was the owner himself. He was a democratic leader he used to lead us by setting examples himself. All the decisions concerning the firm was always taken after consulting the employees of the company. Opinions of all the employees were duly considered before setting goals and targets which were to be achieved. But once the target were set he made clear that it has to be achieved under all circumstances because no targets were set without consulting the employees and above all targets which were set were realistic targets. This type of leadership behaviour is termed as job-centred behaviour by (Buchanan Huczynski 2010, p.598) the company in which I was working was a small size firm with only twenty employees working in it. He had no assistants and use to manage all the employees all by himself. Being a leader he had to deal wi th individual, group and organizational goals which he did it very efficiently and effectively. As mentioned in Buchanan Huczynski(2010)Managers do the things right but leaders do the right things he always did the right things at the right time as a true leader. According (Feilder 1996, cited in Hellriegel, et al. 2010, p.333) Group atmosphere is defined as the level at which a leaders control is accepted. Here in this case the group atmosphere was not at its peak. And the task structure was more of a routine one where goals were clearly defined by the leader to all the employees. According to Burns (1978), cited in Dawson(1996, p.227) he distinguishes leaders in two categories one as transformational leader and other as an transactional leader. the leader of our group was a transactional leader the one who gives what the employee desires and in return ask employees to full fill leaders desires. Here the employees wants were to earn money this was satisfied by giving their hard work and time to the company, an in return employees desires were fulfilled by getting the job done by paying the money to the employee. All employees were satisfied under his leadership style and behaviour including me which led to an comfortable organizational atmosphere to work in to and in this way enhanced organizational performance. The other example which I have noticed is an example of my father when I used to work in our family business. Here the relationship between me and my father was that of a leader, follower relationship. Here the leadership style which I observed was an autocratic one. As I was still a learner into the business I dint have much of knowledge and experience to take decisions. Here the group atmosphere was at its peak and the task structure was a non-routine one because here in this case the leader knows the better than the employee to perform a particular task (Feilder 1996, cited in Hellriegel, et al. 2010, p.333). The organisational goal were common that to increase the sales and thereby increasing the profits of the company. The leadership behaviour observed here was of employee-centred leadership behaviour. This means that the leader focuses on the relationship between the leader and the employee and he also focuses on the need of the employee (Buchanan and Huczynski 2010, p.606) as per James McGregor Burns(1978) the leader here was a transformational leader which means that the followers treated here with relationship in terms of motivation and commitment, and inspiring the followers to give more than the expected to improve organizational performance. The leadership style changes with the same person when it comes to different organization. For example when I am with my father during the office hours he is an autocratic leader, but as soon as we come back from work the leadership style changes. This is supported by Vroom and yettons (1973), cited in Rosenfeld and Wilson (1999, p.201) describes normative theory of leadership effectiveness, which says that the leadership style changes according to different situations. My father is the leader of our family also, here a different style of leadership is observed. Laissez-faire type of leadership is adopted here where all the members of the organization has the freedom to do whatever he wants to do. Here the decisions are not forced upon anybody and everyone has the full freedom to do whatever one wishes to do. Here the common organizational goal is to run the house effectively which the leader has to take care of. Which is fulfilled under this style of leadership. The leadership which I have noticed in the past twelve can also be termed as participative leadership in the first case and supportive leadership in the second and third case (Luthans 2002, p.587).Thus in the end we can say that leadership style and behaviour changes with different organization. From the above given examples also we can state that an effective leader always leads to an effective organizational. And thus in the end according to my own personal experinces I can say that there is a strong relationship between leadership style and behaviour to organizational performance. Refernces:- Buchanan, A.D. and Huczynski, A.A. 2010, Organizational Behaviour. 7th Edition. Essex: Pearson Education. pp. 596-622 Dawson.S.1996,Analysing Organisations. 3rd Edition. Essex: McMillan Press. pp.227-230 Hellriegel, D. et al. 2001, Organizational Behaviour.9th Edition. Essex: South-Western College Publishing.pp.322-354 Luthans, F. 2002, Organizational Behaviour. 9th Edition. Essex: McGraw Hill Higher Education. pp.587 Rosenfeld, R.H. and Wilson, D.C.1999, Managing Organization. 2nd Edition. Essex: McGraw hill publishing company. pp. 201
Sunday, August 4, 2019
If A Tree Falls in the Philosophical Forest, Someone Managed to Undermi
To truly think about knowledge brings about some interesting thought. When asked to think about knowledge, most individuals concern themselves solely with what they know such as certain subjects, theories or facts. In the grand scheme of things, this way of thought is seemingly only minute or even superficial. As human beings, we do not always considered how we come to know what we know. We often place are acquisition of knowledge lower in a taxonomy of importance. All too often, individuals take knowledge and its power for granted. However, individuals like Renà © Descartes and his work, The Meditations, provide a deep exploration of knowledge and all its facets. For every individual or scholar this work is very important in that it causes the reader to consider what we assume as truth and to envision a foundation for knowledge that is indubitable. The aim of this paper is to consider the role of knowledge in epistemology, to expose the concept of an indubitable foundation for all knowledge and the overall influence of Descartes on the imminent enquiries. First of all, I demonstrate that epistemology is the study of all that encompasses knowledge. Furthermore, I support the traditional epistemological concept of justified true belief by arguing that this model is largely relied on in the expectations of current empirical data. Second, I examine Descartes intentions, method and product, The Meditations. Following this review, I assert that it is impossible to find a true foundation for knowledge due to the unknown origin of human creation, the element of subjectivity and solipsism and the limitations of knowledge being indubitable. Furthermore, I critically assess that the Cartesian circle and Descartes presumption of God in h... ...rably thoughtful but is not without flaw and criticism. As stated, his goal and ambition is admirable in that he sought to support what his previous achievements, and those of many others, where fatefully resting upon. Whether scholars, students or just the individual interested in philosophy may agree or disagree with Descartes meditations, one thing I argue is truly beneficial about Descartes work is that doubt can be very valuable to our every day lives. All to often individuals take such facets of news, gossip, literature and theory all too seriously and fail to see the implications of implying indubitable confidence in what we accept as individuals. References Descartes, R. (2003). Meditations and Other Metaphysical Writings. Toronto, ON: Penguin Classics. (Original work published 1641). Lightbody, B. (2011). Philosophy 1F91 Lectures. Brock University.
Saturday, August 3, 2019
The Role of Women in The Epic of Gilgamesh Essay -- Foster, Literary An
The story starts off with Gilgamesh, the King of Uruk, who is one third man and two thirds god. This story is about a man's quest for immortality in addition to the importance of boundaries between the realms of animal, man and gods. Women symbolize the importance of locative boundaries in the text. These boundaries are set by the harlot Shamhat, Ishtar, Siduri, the tavern keeper, Ninsun and Utanapishtim's wife. By giving women this role of wisdom and boundary enforcement, The Epic of Gilgamesh reflects how Mesopotamian society actually valued women. The harlot, Shamhat, serves to establish the boundary between animals and humans. Enkidu, a creature on the border between animal and man is selected by the gods to balance out Gilgamesh's power. Gilgamesh summons Shamhat to civilize Enkidu after a hunter complains to him about not being able to hunt properly. The harlot, "made herself naked and welcomed his eagerness; as he lay on her murmuring love she taught him the woman's art" (64). Not only did the harlot have sex with Enkidu she also gave him clothing, good food and wine causing Enkidu to become a man" (67). This shows not only the locative emphasis of a man's role in society but also a woman's role in securing that place. By civilizing Enkidu, the harlot manages to keep Gilgamesh in his place by establishing an equal for him. Similarly, both Ishtar and Siduri maintain the boundaries between humans and the divine realm by trying to keep Gilgamesh in the realm of man. Gilgamesh insults Ishtar with rejection and she then sends down the Bull of Heaven as revenge (85-88). After Enkidu and Gilgamesh kill the Bull of Heaven Enkidu insulted Ishtar further when he, "tore out the Bull's right thigh and tossed it in her face" (88). ... ... Gilgamesh sleeps show that he is powerless over sleep. Utanapishtim's wife represents Gilgamesh's inability to be immortal and the necessity of boundaries between the realms. Therefore, both Utanapishtim's wife and Ninsun symbolize wisdom and the boundary between man and gods. Thus, the role of women in this story serves to keep animals, men and gods in their respective boundaries. The harlot represents civilization by taking Enkidu from wild man to civilian and putting him solely in the human realm. Ishtar keeps Gilgamesh in check by taking Enkidu's life as a result of their disrespect while Siduri shows a woman's wisdom by giving Gilgamesh his lot in life. Meanwhile, Ninsun gives Enkidu to Gilgamesh as an equalizer as well as her prophetic knowledge. Lastly, Utanapishtim's wife shows that Gilgamesh can never be immortal and therefore must stay in his own world.
Friday, August 2, 2019
How to Prepare the Perfect Beef Wellington
To prepare a perfect and truly unforgettable Beef Wellington, there are a few special steps that you have to follow in order for it to become truly and amazingly unforgettable. During the course of this paper, I will walk you through the steps to achieving just that.Together we will uncover the myths that lie beneath the cookbook horror and torture that make so many of us shy away from trying this dish because of failure. Creating an exceptional dish will require you to work with an assortment of utensils and ingredients. You may not be familiar with all of them, but do not be alarmed.They are all easy to master in the end. Letââ¬â¢s start with the grocery list and move you into the process slow and steady. I will list the required measurements beside each item. They are not in any special order. ? One 4-6 pound Beef Tenderloin ââ¬â (a specific cut of beef) ? ? cup of diced onions ? 5 tbsp + 3 tsp of Extra Virgin Olive Oil ? 10 cloves of garlic ââ¬â 4 minced completely and 6 peeled ââ¬â gently smashed (you can do this as you peel them, it is easier to get the peel off the cloves if you lay the flat edge of your chef or butcher knife on the clove and hit the topside of the blade with your fist.) ? 1 cup sliced mushrooms ââ¬â your choice of type ? 6 tbsp unsalted butter at room temperature ? 2 tbsp salted butter (melted) ? 1 pkg frozen puff pastry ââ¬â you will need at least 1 ? of the 2 in the pkg. ? 4 tbsp Kosher or Sea Salt, mainly due to the texture ? 2 tsp plain salt ? 4 tbsp fresh cracked black or multicolored peppercorns ? 1 egg + 1 tbsp water mixed together to make an egg wash ? Cooking spray (such as Pam) ? 2 ââ¬â 3 tbsp all purpose flour for dusting your work surfaces ? 4 tbsp Red Wine ââ¬â any kind as long as you enjoy the taste yourself.Do not ever cook with wine that you would not drink yourself. You can substitute this with cooking wine if you like. Now I will list the utensils you will need for the preparation of this dish. You will need to gather the required items and have them in your reach when you begin to prepare the dish. Having all the ingredients and required utensils within easy access helps the process go more smoothly. So take a few minutes to gather everything you need for this adventure, set it up in a clean, spacious area of your kitchen so it will be well organized before you begin. Trust me, this will help so much.? A copy of this recipe in a zip-lock bag to keep it from getting dirty. You can tape it to the wall or prop it up somewhere easy to see at eye level. ? 1 large Chef or Butcher knife that you are comfortable using ? 1 long, bladed Fillet Knife ââ¬â very sharp ? 1 pair of tongs ? 1 large skillet ââ¬â one big enough to lay the tenderloin inside to sear the sides ? 1 large roasting pan with a rack in the bottom to keep the roast off the pan surface ? 1 flat baking sheet with at least a ? inch lip ââ¬â lined with aluminum foil ? 1 Pastry Brush ? 1 Rolling Pin ? 1 large cutting board? 1 Gallon size Zip-lock bag ? Cooking twine ? Scissors ? Measuring Cups ? Measuring Spoons ? 1 medium mixing bowl ? (Optional) Small cookie cutters in leaves, circles or crescent shapes Arrange all of your ingredients and utensils around your work station. Doing this will ensure the most comfortable way that works for you when it comes time to start. Preparation of the various items that need to be chopped, minced, diced, etc. , will speed the process up when you begin to work on the actual dish. When you feel comfortable with your arranged supplies and ingredients, you can begin.Step 1: To get everything started and underway, please preheat your oven to 400 degrees. Place the skillet on the stove and heat it on a medium high temperature. When the skillet begins to warm you can add the 2 tbsp of Extra Virgin Olive Oil, 1 tbsp butter and a pinch of salt & cracked pepper. As the ingredients begin to melt down, drop in your diced onions, 4 minced cloves of garlic , the entire cup of mushrooms and the 4 tbsp of red wine. Saute them on medium high until the onions are translucent, the wine has reduced in volume and the mushrooms are tender, yet not falling apart.Remove from the skillet and allow to cool while we mix the other ingredients together for the filling. Step 2: To prepare the filling for the tenderloin you will need to mix together the following ingredients: 4 tbsp softened butter, your sauteed onions, mushrooms and garlic mixture after they are cool enough to handle. Mix very well until you form a creamy spreadable butter mixture. Now we are ready to prepare the tenderloin. Step 3: To prepare the tenderloin you will need the cutting board and the fillet knife.. If you have never filleted a piece of tenderloin before, it is not really that hard.I will walk you through the steps. First you need to lay out your tenderloin on the cutting board facing you lengthwise. Place the knife on the left side end of the tenderloin and make an inci sion into the tenderloin about 1 ââ¬â 1 ? inches thick. Slowly continue to cut along the length of the tenderloin until you reach the other end, trying your best to keep the depth of your cut as even as possible. When you reach the end, you start over again but going the opposite direction making sure to keep the same depth of your cut until you are able to lay the tenderloin out completely flat on your cutting board.You have just filleted a cut of beef. See, it was not that hard. Step 4: Take your butter mixture, place it in spoonfuls onto the flat tenderloin and rub it very generously all over the tenderloin, allowing about ? inch at one end with no mixture ââ¬â that will be your top sealing flap. After you have rubbed all the mixture into and all over your tenderloin, begin to roll the tenderloin back onto itself lengthwise, forming the round tenderloin as before you cut it, just now with lots of yummy stuffing inside.Wash your hands very well, grab your kitchen twine and cut 5 ââ¬â 7 equal pieces of twine about 16 ââ¬â 18 inches long. You will take each piece, wrap it around the diameter of the roll starting at one end and work your way to the other, tying up the tenderloin so it will hold together while you sear it for sealing. Do not worry about the extra string, just cut off the excess after you finish tying up the entire piece of tenderloin. By this time the tenderloin should be at room temperature which is the perfect degree to get a sear on the tenderloin without it becoming tough and chewy.Always let your tenderloin rest at room temperature or close to that before placing it inside a hot pan so you do not have all the tiny tendons and muscles that are woven inside the tenderloin seize up and shrivel. That is what happens when you put a cold piece of beef into a hot skillet, grill or pan, and that is how it becomes very tough. Step 5: Now we are going to sear our tenderloin, but before we do this, we need to heat the remaining butter inside the skillet allowing it to become very hot, but do not burn the butter! It will taste horrible and you will have to wash out the skillet and start all over again.Drizzle the 3 tsp of olive oil onto the tenderloinââ¬â¢s outside surface and rub it all over the tenderloin. Combine the remaining Kosher salt and the 3 tbsp of the cracked peppercorns to sprinkle all over the outer surface of the tenderloin after you coat it with the olive oil, do not forget about the ends of the tenderloin, they need love too. Step 6: With your skillet growing hot on medium high to just above medium high, take your tongs and lift the tenderloin up, placing it into the searing hot pan on the seam side first. Leave it on that side at least 3 ââ¬â 4 minutes for the proper crust to form on the outside of the tenderloin.Now repeat this all over the entire tenderloin, making sure you do not forget the ends for this step as well. You will have to hold the tenderloin with your tongs as it stands on end to sear the end pieces but trust me it is totally worth it. When you are done with searing the surface of the tenderloin, it should look crispy / crunchy and a deep golden brown, do not let it burn, watch it very closely during the searing process. It is a fine line at this point between searing to the perfect golden crunchy exterior and burning it into a piece of shoe leather.Remove the tenderloin and skillet from the stove top and place the tenderloin aside to rest about 10 ââ¬â 15 minutes while you prepare for the next step in this process. Allowing the tenderloin to cool somewhat will help when it comes time to wrap it in the pastry. Step 7: We will now start on pastry preparation. The puff pastry usually comes in two folded sheets for each package. You will need both of them to be almost room temperature and pliable but not totally thawed out. The dough would become to flimsy if completely thawed.It will rip and tear when you are try to stretch, move or roll it out. Pas ty dough always works better when cool to cold, so when you are preparing any kind of dough, do not do it near the oven or any source of heat if you can help it. Dust the clean surface of your work area with flour, but reserve some for your rolling pin and hands. Unfold the sheets of pastry out onto the floured surface. Now take your rolling pin, dust it with flour and begin to roll out the creases in the dough so it will seal properly and not crack or break when you are rolling it around the tenderloin.As your are rolling out the dough make sure you do not over work it too much and keep dusting with flour as needed to prevent the dough from becoming tough when baking. Now you can size up the width and length of the pastry either by your eye or you can measure it. Basically it needs to be long enough to wrap around the girth of the tenderloin with a 1 inch edge to overlap when you finish. That is the piece that is used to seal the seam along the bottom of the tenderloin. You also ne ed at least 1 ? to 2 inches left on the width of the pastry to seal the ends of the tenderloin.If it seems that you are going to need extra dough on the width or length, cut sections from the second sheet of dough, brush the adjoining ends with egg was and overlap them. Pinch the dough together to form a seal and roll out the seams until flat. Patch work is easy and sometimes necessary, but do not worry. You can use the seam to roll under the tenderloin and once you have it wrapped around the meat, you can smooth it out with your hand or cover it with decorations. The same goes for the ends, they are supposed to look like the crinkled, crimped ends of a sausage.Creases are supposed to be there. Just make sure you take your time, do not get frustrated and use the egg wash to help with the seal. Step 8: Now that you have sized up your pastry, make your egg wash. Beat 1 egg in a small bowl with 1 tbsp water until the mixture is slightly frothy or bubbly. Step 9: It is now time to remov e the twine from the tenderloin. The tenderloin should be cool enough that you can handle it. Be gentle removing the twine so the tenderloin does not begin to unroll while you are removing the twine.You can either use tongs, the serving fork or your hands to hold it steady while removing the twine. Cut each piece twine with your knife and pull it from around the tenderloin. Place the tenderloin at the top of the pastry dough with both facing you lengthwise. Making sure you will be able to roll it towards you to see that the dough is not tearing. This also helps to make sure that the patches, if you had to make any, do not break apart as you roll them and you can catch it in case repair in needed. Step 10: Begin rolling the pastry and tenderloin towards you.Make sure the entire piece is covered with pastry as you roll. There should be a 1 ? ââ¬â 2 inch piece of dough hanging over at each end of the rolled tenderloin when complete. With a pastry brush, apply egg wash to the sectio n of pastry at the end of the roll closest to you. Brush egg wash on the dough already around the pastry where the two sections are going to overlap also. This will help secure the seam you are going to create. By pinching the two sections of overlapping dough together that have the egg wash ââ¬Å"glueâ⬠on them you will form a seal of dough.Smooth the seam out with your fingers after you are satisfied it is sealed. This side will be on the bottom of the baking pan so if it is still a bit lumpy that is alright. If you need extra dough on the ends to help complete the seal of the tenderloin use some of the excess scrape pieces you have left over. To seal the ends, fold down the edges starting at the top and working your way around, overlapping the dough and crimping the ends together like a roll of sausage. This is where you can use patchwork if you need a little extra dough just to seal it completely.Brush each end with egg wash to help hold the seal here also. Step 11: Now fo r an elegant touch, you can take small cookie cutters in the shape of leaves, crescent moons or circles and cut shapes of the remaining dough to place on top of the finished roll before placing it in the oven. Make sure you brush the top of the tenderloin again with egg wash if you added these. Step 12: Take your cooking spray and spray the baking sheet lined with foil very generously so the pastry will not stick to the foil.Make sure you have brushed the top and sides of the tenderloin pastry with the egg wash very well before placing the tenderloin, seam side down, on the foil lined baking sheet. Place the baking sheet on the middle rack in the center of the oven. Bake at 400 degrees for 13 -16 minutes. This step will help keep the puff pastry crunchy all over, while still cooking the tenderloin long enough to have the slow roasted taste. When the top of the crust starts to become a light golden brown, remove the tenderloin from the oven and check the bottom of it.Has the pastry f ormed a good crust on the bottom or is it still soggy looking? It needs to have a good crust started before we can move it to the roasting pan. If there are still a few soggy parts on the bottom, cover the pastry with a piece of aluminum foil so it doesn't start to burn. There needs to be enough foil to fit down both sides and the ends of the tenderloin roll to ensure the pastry does not overcook and begin to burn during this part. Place the baking sheet back in the over for another 8 or so minutes, checking about 5 ââ¬â 6 minutes in just to make sure it does not burn on the bottom.Step 13: When the pastry wrapped tenderloin becomes crunchy on the bottom, light golden brown on the top and smells like heaven, it is time to add the final touches and allow it to slow roast a little longer to infuse all the wonderful flavors even more. In the bottom of the roasting pan, put the 6 smashed garlic cloves, 2 tsp salt and the 3 tbsp of Extra Virgin Olive Oil. Just scatter them around und er the baking rack. Now place the tenderloin, seam side down, on the rack inside the roaster. Allow the foil ââ¬Å"hatâ⬠that we used already to cover the pastry to stay on for the first 20 minutes.If you did not have a foil ââ¬Å"hatâ⬠earlier then please make one now so the pastry does not burn during this cooking stage. It needs to cover the sides and all across the top of the pastry. When the 20 minutes is up, remove the roaster from the over and remove the foil ââ¬Å"hatâ⬠from the the tenderloin. Check the pastry for any soggy areas underneath or on the ends. Melt the last 2 tbsp of salted butter and with the pastry brush, slather all of the butter on top of the pastry dough, its sides, edges, everywhere you can reach.Don't worry about the bottom it will run down there and help with the final roasting of the garlic cloves as well. Place the tenderloin uncovered back inside the oven for an additional 15 minutes making sure that you get a golden brown crust on the pastry and do not let it burn. Different ovens vary in temperature and cooking times, please watch your crust to make sure it does not burn. You can reduce the cooking time or increase it as you are cooking this to work with your specific oven. Step 14: Remove the roaster from the oven.Allow the tenderloin to sit in the roaster for about 5-7 minutes, then move it to the cutting board to rest for at least 10 ââ¬â 15 minutes more. This will help with the settling of the juices inside the meat, it will also help when you go to cut it so the pastry does not tear so easily. While your meat is resting, you can be finalizing your side dishes, table arrangements or just sit there and smell how good it smells until you finally get to cut into it. Step 15: The last step in the preparation of this amazing meal centerpiece is the cutting of the tenderloin.The key to cutting a perfect piece is to make sure your knife is extremely sharp. Serrated edged knives are best due to the pastry, h owever, if you prefer a chef's knife, sharpen it very well before you cut into this beautiful masterpiece. I prefer to use the tongs when trying to stabilize the tenderloin for the cut of first slice or two. Poking into the crust with the serving fork right off the bat sometimes allows more juices to run out of the meat while you are trying to cut it and the pastry becomes soggy and tears.So start at the end of your choice and move your knife about 1 to 1 ? inches into the body of the tenderloin. Steady it with your tongs and make one smooth slice from one side of the tenderloin to the other using the full length of the knife, drawing it from the handle down all the way to the tip. Then if you need to go back and slice again, repeat the same step. This will ensure that you are not tearing up the meat or the pastry. This is the conclusion of my special way of cooking Beef Wellington. I hope you will enjoy this dish as much as I have.Preparing it and eating it are both a joy to me. I hope it will be that way for you also. Never let a cookbook scare you into submission. Everything is worth trying to do when it comes to food. You might have to try some things over and over again to get it just the way you like it. The final product regardless of how many times you made it will be worth it. When your family and friends can't stop telling you how wonderful it is, you can tell them it was easy and just smile. Who knows you could have a magic touch
Thursday, August 1, 2019
Change and Cultural Case Study
Six months after the merger of Mercy Medical Hospitals and the Promedica Health Systems, the new administration initiated a significant reduction in workforce. The decision was made to redesign patient care delivery. The administrationââ¬â¢s first job redesign recommendation was that of a universal worker. The universal worker would deliver many support services. Although this is not a fail proof system, the administration wanted other options to be considered as well. The term universal worker is used when a person is cross trained in many departments, and therefore has a little more assignment flexibility. They are often used in call centers and hospitals to alleviate staff shortages and provide better service without the difficulties of processing so many referrals or dealing with call transfers (webAnswers. com2010). Depending upon the setting, universal worker may be more beneficial. One area that would fall within this area would be assisted living facilities; some of which have been affected since the merger. While some assisted living facilities still operate within this model, the industry as a whole is moving toward a more holistic approach to care in which the universal worker attends to all the daily living needs of their residents: assistance with ADLs, meal service, light housekeeping, laundry, programming, etc. Rather than dealing with four or five different people to have their needs met, residents are able to relate to one or two staff members who actually know them and are familiar with their needs, their routines, their likes and dislikes. The result is care that is more personal, customized and consistent (Widdes, 1996). An additional benefit is increased efficiency in staffing, i. e. , while the caregiver is assisting a resident with his bathing, dressing and so on, he or she may also be able to perform other duties, rather than having to call someone to dust off a countertop or clean a bathroom. Ultimately, this approach can result in increased staffing efficiencies. . The universal worker approach also seems to enhance job satisfaction. Feedback from the staff indicates that they enjoy being responsible for the resident as a whole rather than only one aspect of their care. It is a feeling that undoubtedly enhances the caregiverââ¬â¢s sense of job importance (Widdes, 1996). Training staff to assume responsibilities across departments and even more challenging, reshaping their attitudes and approach to care is an undertaking that requires a commitment to training, retraining and diligent follow up. It is imperative that management be very much in tune with this philosophy. Because this model often fails when implemented, there are only certain departments such as assisted living that the universal worker would actually be implemented in. For the majority of the facility, we would look at job redesign. In order for objectives to be achieved, thought needs to be given to other areas that will be impacted and may require changes to be implemented (An Organization Redesign Process). Other organizational systems that may be impacted by the introduction of a performance based reward system include: â⬠¢The Information System How much information is given to team members, the speed at which they receive it and their ability to us the information to improve results. â⬠¢The Training System- New skills training for employees may need to be implemented in order for them to be able to understand how to interpret information, training in new skills in order for the employees to do their jobs for effectively. â⬠¢The Organization Structure- Departments may need to be integrated or roles significant changed. Decision-making Systems ââ¬â Consider changing the way decisions are made and the level at which they are made. Authority to decide might need to be taken down to lower levels so that employees are able to make decisions the enable them to more quickly influence or improve the results. â⬠¢Tasks and Technologies ââ¬â Need to be improved in order fo r the bonus system to achieve its objectivesâ⬠¦reward people for improved business performance. Changing an organization through an organization redesign process is a journey and generally a rather long journey. That is why the following three principles must be understood by anyone who is about to undertake any type of organization redesign: â⬠¢The entire system has an effect on each element within the system â⬠¢Every element in the system has an effect on the entire system and on each other â⬠¢No matter what you do, the two points above always hold true. When an organization goes through redesign, 1. People need to be identified as being responsible for driving the organization through the process. Those individuals include: â⬠¢Organization Leader: Who is generally the most senior person in the organization. This person will set the direction that the process will go in and names the Steering Committee â⬠¢Steering Team: Consists of key leaders from the organization and other stakeholders. This teamsââ¬â¢ responsibilities include naming and commissioning the Design Team, establishing boundaries and guidelines for the Design Team, approving Design Team recommendation and ensuring the Design Team have the resources (time and money included) they require to get the job done â⬠¢Design Team: Generally consists of employees, half are lower level employees and the other half are upper management. Are responsible for reporting back to their functional teams on design choices being recommended and getting the input of the Implementation Team â⬠¢Implementation Team: Basically, the entire organization, who implement the design choices recommended by the Design Team (and approved by the Steering Team). â⬠¢Renewal Team: This team is set up after the Implementation Team. It monitors and assesses to what degree the organization design has done, what it has intended to do and make recommendations for further changes as required. â⬠¢Consultant: Recommends and teaches the design model, the use of tools and methodology. Provides guidance to ensure the design effort stays on track. Provides expertise regarding best practice design choices and independent advice (An Organization Redesign Process). 2. Train the Strategic, Steering and Design Teams. All teams must have a commitment to the process and be able to understand the process in order to go ahead. 3. Environmental Scan: Become aware of the needs and expectations of the external environment: Customers (current and potential), Stakeholders (shareowners and their representatives), Influencers (regulators, suppliers, government, etc. , Competitors and Best in class organizations. 4. Develop Vision & Mission Statements: These statements describe why the organization was created, why it exists and its distinctive competence. 5. Success Criteria: Nominate the outcomes desired in these four categories: Customers, Stakeholder, People, Community 6. Culture: Identify the behaviors, skills and characteristics that the people working in the organization must have, along with the guiding principles that encourage people to use these behaviors and skills, in order to achieve the vision and mission. . Strategies to Influence: Determine the strategies needed to manage and reduce variability and demands from the external environment. This enables you to meet both the requirements of the external environment as well as achieve your desired performance outcomes. 8. Key Performance Indicators: Choose which ones will deliver the business performance required along with inspiring the behaviors and characteristics articulated in the culture. 9. Technical System: Analyze and redesign in terms of how tasks are performed, technologies required and the layout of buildings/facilities so that the people and the technical system are integrated for high performance. 10. Structural System: Design the structure for each of the three teams: Front Line, Resource (known in traditional organizations as Management) and Strategic so that they foster the culture required delivering high performance. 11. Decision Making & Information System: Review: what, where, how decisions are made, what information is needed to make those decisions and how it is stored and captured. 2. People System: Review: Competencies, Job Design, Selection, Induction/Orientation, Learning, and Performance Contracting, Career Development. 13. Reward System: Review how employeeââ¬â¢s contributions are recognized and rewarded. Does the system encourage people to focus on organizational goals? 14. Renewal System: Decide how you will regularly review your business and make any design changes needed to ensure continuing optimum performance. 15. Develop an Implementation Plan: This plan identifies who is responsible for implementation, time lines, resources requires, potential bottlenecks, and contingency plans 6. Execute the plan: When the Implementation Team is kept involved in the process and has input to the Design Team, implementation happens much more quickly and seamlessly. Peter Senge (1990) suggests that team learning is the process of aligning and developing the capacities of a team to create the results its members truly desire. It builds on personal mastery and shared vision. When teams learn together, not only can there be good results for the organization, members will grow more rapidly than could have occu rred otherwise. Virtually all important decisions occur in groups. Teams, not individuals, are the fundamental learning units. Unless a team can learn, the organization cannot learn. Team learning focuses on the learning ability of the group. Adults learn best from each other, by reflecting on how they are addressing problems, questioning assumptions, and receiving feedback from their team and from their results. With team learning, the learning ability of the group becomes greater than the learning ability of any individual in the group (Learning Organisations). In order to make the work teams function at its optimal performance, there are nine key activities or work functions that must be present. Those functions include: â⬠¢Advising ââ¬â gathering and giving information â⬠¢Innovating ââ¬â creating new ideas or brainstorming new ways to tackle old problem â⬠¢Promoting ââ¬â selling the idea to management and gathering all the resources â⬠¢Developing ââ¬â once the idea has been sold to management, it then needs to go to the analytical process and be developed. â⬠¢Organizing ââ¬â setting up a structure and resources so that the product, scheme, or service can work. Producing ââ¬â putting the product or service together. â⬠¢Inspecting ââ¬â watching out for details. Inspection of the high quality must be maintained and accurate records must be kept. â⬠¢Maintaining ââ¬â it is associated with the support services offered in an organization and the general background work done in a team to ensure that its requirements can be met quickly and efficiently. â⬠¢Linking ââ¬â is central to the success of all teams. It is the difference between an effective and an ineffective team. Someone coordinating all the team members to ensure that there is maximum cooperation and interchange of ideas, reports and experiences (Margerison, C. & McCann D. , 2000). Being able to plan, and control the intra-organizational and inter-organizational communication that must occur to implement the job design changes will be difficult but not impossible. The information that needs to be given out during the job redesign would have to be given to top managers right before it is given out. Then the staff can be in-serviced on the changes that would be going into effect and a question, answer type forum be done. Once the changes have been implemented, a committee of staff and managers can be appointed to look at the changes and see if there are any additional changes that may need to be implemented because of the initial changes. This is also a way to ensure job satisfaction. If the employee feels that their feedback is worth something and is being listened to, they are more willing to make the changes that need to be made. If individuals enjoy doing a job, they perform at their very best. Giving them the opportunity to be a part of the job redesign, makes them feel as though they have contributed to something and it is worthwhile to the employee.
Subscribe to:
Posts (Atom)